16dBi Telstra 4G LTE 1800MHz MIMO Yagi Antenna Kit

View larger image

Dual 16dBi 4G LTE 1800MHz MIMO X-Pol Yagi Antenna

Price: AU $176.00




16dBi - DUAL MIMO Yagi Antenna Kit
4G-LTE 1800 MHz
- Wireless Broadband

NOTE !!  4G LTE 1800MHz only - NOT suitable for 3G or nextG 


Benefits - Who uses these antennas.

  • 4G LTE 1800MHz capable routers and modems.
  • For Fixed Wireless, Outdoor  installations. 
  • Improves signal quality and download speed by accessing the Dual Carrier and/or MIMO capabilities of the 4G LTE service.
  • Homes, Offices, Contractors, rural and metropolitan.
  • Metro and Rural locations requiring more signal from the mobile phone tower.
  • Correctly installed, this antenna may turn an unreliable 4G internet connection into a fast broadband and quality VoIP service.
This antenna suits 4G LTE services using microwave frequency of 1800MHz. At this frequency, much signal can be absorbed by rain, fog, and vegetation that is in the direct line from the tower to your location. Also, the signal path needs to be line-of-sight. This doesn't mean you need to be able to see the cell tower, it just means there must be no significant solid buildings, hills or mountains blocking the direct path. Exceptions to this are built-up areas where the signal can reflect off solid structures providing coverage. To get the best LTE connectivity you'll benefit form the increased Signal Strength and Signal-to-Noise ratio these directional antennas will provide.

16dBi 4G LTE1800 Yagi antenna free radiation pattern


16dBi 4G LTE1800 Yagi antenna dimensions

Included in the kit (x2)

16dBi 4G LTE1800 Yagi antenna kit


Supplied with FME-Female and SMA-Male (adapter) final connection.
Patch Lead (if required) not included sold separately


Electrical Data

Frequency: 1710-1880 MHz
Gain: 16 dBi
VSWR: <1.5:1
Polarization: Vertical
Horizontal Beamwidth: 27°
Vertical Beamwidth: 23°
Nominal Impedance: 50 Ohms
F/B Ratio: >18 dB
Max Input Power: 100 W
Lightning Protection: DC Ground

Mechanical Data

Connector: SMA Male
Dimensions: 805 x 120mm
Weight: 0.5kg
Cable Length: 240mm
Reflector Material: Aluminum Alloy
Antenna Material: Aluminum Alloy
Mounting Method: Mast
Mast Diameter: Ø40-Ø50mm
Rated Wind Velocity: 210km/h
Operating temperature: -40~+65°C
Type: 16 element Yagi


* Patch Cable not included. Please purchase separately

Some minor assembly required to fit slant-pol brackets.
You'll need a philips screwdriver and 10mm spanner or shifter.

Cables & Connections

 The antennas have SMA male connector.

Antenna Pigtail has SMA male connector
The optional additional coax cable is supplied with adaptor(s)

LMR240 low-loss coax cable +
Dual FME SMA Coax Cable Modem Connector Dual FME SMA Coax Cable Modem Connector

 Antenna Coax Cable
Select your required length of
LL195, LL240 or LL400 low-loss coax cable.
Connects Antenna to Wallplate or direct to your modem/Patch Cable.

Coax specs


 SMA-Male and FME-female Final Termination
*When antenna is purchased with an Optional Coax
Selected Coax Cables are supplied with adaptors to provide final terminations of both SMA Male and FME female via included adaptor(s).

Others available

Phone/Modem Patch Cable not included - Please purchase separately

Mast shown in pictures is for illustration purposes only.
Mast or pole not included
1800 MHz Compatible
Carrier/Service Band Mode Bandwidth Compatible?
Telstra/Bigpond nextG  850MHz 3G WCDMA 824~894 MHz no
Vodafone 3G, 3G+ HSPA, HSPA+
Optus, Virgin, Vodafone
3G (900MHz)
900MHz UMTS/HSPA 900 880~960 MHz no
Telstra  - 4G LTE - Advanced
900 plus 1800MHz 4G LTE-A
Dual Band
880~960 MHz +
1710~1880 MHz
Telstra Vodafone & OPTUS - 4G LTE 1800MHz LTE 1800 FD
1710~1880 MHz
Vodafone, Optus, Telstra
GSM/3G - voice/sms/data
1920~2170 MHz no

*Services are being continuously updated - subject to change.
Best Coax Cable for 4G LTE

Consider using super-low-loss LMR400 coax for 4G LTE

LMR240 & LMR195 coax are very high quality coax cables. However there are no magical loss-free coax cables and as such are subject to attenuation that increases with increased frequency and longer length as any coax cable.
As the upper 4G bands of 1710MHz - 2700MHz the attenuation per metre will be more than double that of the lower 700, 850 and 900MHz bands.
Thus we always recommend LMR400 super-low-loss coax for runs more than 5m for frequencies over 1GHz in low signal areas.

Each Kit includes a strip of Self Amalgamating Tape to seal the outdoor antenna connection.
  • Seal antenna connections against Rain, Moisture and UV sunlight.
  • 19 wide x 0.8mm thick.
  • Sufficient tape to cover the outdoor SMA antenna connections in the kit.

Got a comment or have a question? Ask it here ...


Website Security Test

™LMR is a registered trademark of Times Mircowave Systems USA