Assembly Instructions:  9dBi and 11dBi Dual LPDA Antenna Kits

Required Tools
A small amount of assembly is required, you'll need:
- Philips Head Screw Driver.
- 10mm Spanner or Socket

Antenna Spacing
The two antennas do not interfere with each other as long as they do not physically touch.
However its good practice to mount them at least one antenna width apart and can even be mounted on separate poles. 

Which Antenna to which Modem Socket #
It does not matter which antenna connects to the Main and which connects to the Aux antenna socket on your modem.

Recommended Coax
We recommend the use of LMR-400 Coax cable for runs greater than 10m when connecting to Telstra NextG DC-HSPA services.
When connecting to 4G LTE 1800MHz, LM-400 coax should always be used.
   
1. Unscrew the Mounting plate from the antenna's body. 

   
 2. Rotate the antenna by -45º with respect to the
normal vertical mounting position

#This will be the -45º antenna.
 3. Second antenna is mounted using the
screw holes at 90º to the first.

#This will be the +45º antenna.
ONwireless.com.au