Loading...

Email Notice

We are having issues with our emails,

please use remote.one.sa@gmail.com


Telstra Cel-Fi GO 3G/4G Repeater for Buildings

View larger image

Telstra Cel-Fi GO 3G/4G Repeater for Buildings

CODE: G31-3/5/28S, RPR-CF-00065


List price: AU $1,050.45  

Price: AU $955.00

You save: AU $95.45 (9%)
-9%
In Stock
Description

The Cel-Fi GO for Telstra will boost voice and mobile internet for multiple mobile devices.
Cel-Fi GO Repeater is LEGAL for use in Australia and APPROVED for use by Mobile Network Operators.

* This listing is for just the Cel-Fi GO repeater.Coax cables and antennas are not included.Please refer to Related Products for Coax and Antenna Options.
It is not just an amplifier, but a Smart Repeater which dynamically adjusts its gain and connection status to provide optimum mobile signal quality.Suitable for distribution of 3G/4G mobile signal within Home Workshops and Commercial buildings etc.
As the signal available from the mobile network drops, the Cel-Fi repeater increase its boost level by up to 100dB drastically reducing dropped calls and slow data in mobile black spots.

  • Designed for fixed building installations.
  • Up to 100dB of dynamic system gain.
  • Provides a coverage area sufficient for between 5 and 20 simultaneous users, depending on the activity.
  • Connects to 3G 850MHz (B5) or 4G 700MHz (B28) or 1800MHz (B3).
    *Note - Connects to only one 3G or 4G service at a time.
  • Locked to Telstra's Mobile Network.
  • Can set to automatic or manual band selection.
  • SMA type outdoor antenna connection for mobile network connection.
  • SMA connector for attaching for indoor coverage antenna.
  • Carrier approved and legal for use in Australia.
  • Band Selection Button - Note that the GO will connect via only one band at a time.
  • Bluetooth WAVE App for iPhone, Android & Computers

Stationary Cel Fi GO repeater for Buildings Notes regarding 3G and 4G mode selection.
Cel-Fi GO will boost a single band at a time, connecting via 3G 850, 4G 700 or 4G 1800.It will not boost 3G and 4G at the same time.
Unless you specifically require 4G, it is highly recommended to leave the GO in 3G mode to ensure voice calls are received on older and newer phones.Voice over 4G (VoLTE or Vo4G) will only work in selected areas and with later model phones.

This version does not include any Coax cables or Antennas antenna.This kit can be connected to existing 3G/4G antennas and is a good replacement for illegal repeaters.

Please select the coax cable type and length needed.
An outdoor network antenna and indoor distribution antenna are required.


Cel-Fi is covered by a 24 month warranty.

® is a registered trade mark of Telstra Corporation Limited.

*Note that this guaranty assumes that there is actually signal available to your location.

 

Features

Carrier Band and Mode

    B28 700MHz B28 700MHzB5 850MHz B5 850MHzB3 1800MHz B3 1800MHz
    Telstra/Bigpond Telstra/Bigpond
Specifications
FREQUENCY

UMTS/3G 850 - Band 5
Uplink: 824 - 849 MHz, Downlink: 869 - 894 MHz
4G 700/1800 - Band 28 & 3
Uplink: 703 – 733 MHz, Downlink: 758 – 788 MHz
Uplink: 1710 – 1785 MHz, Downlink: 1805 – 1880 MHz
(Will boost only one band at a time)

DATA

UMTS / HSPA / HSPA+/ 4G LTE (FDD)

GAIN

Up to 100dB system gain (Go Stationary)
Up to 70dB system gain (Go Mobile)

BOOSTING THRESHOLD

Will only boost between these signal levels:
3G: -80dBm and -104dBm
4G: -95dBm and -119dBm

BAND SELECTION

Button for band selection:
3G: 850
4G: 700 or 1800 (strongest signal)
AUTO: 850, 700 or 1800 (strongest signal)

NETWORK UNIT

H: 28mm
W: 87mm
L: 255mm
Weight: 600g

ENVIRONMENT
Operating Temperature: 0° to 65°C
Storage Temperature: -25° to 65°C
Relative Humidity: 0 to 95% noncondensing
POWER
12 VDC via external supply
External Supply: 100-240 VAC, 47-63Hz
Power Consumption: <15W per unit
INTERFACES
External Antenna Ports: Donor and Service SMA Female
Programming Ports: Mini-USB
Bluetooth Low Energy
WARRANTY
24 months
CERTIFICATIONS

CE Mark
C-TICK
FCC
RCM

Attachments

Cel-Fi GO Quick Start Guide (qsg_GO-stationary_v12_420N007-G31-001-00RA.pdf, 728 Kb) [Download]

Cel-Fi GO for Telstra Brochure (CelFi-GO-Telstra-Stationary-Brocure.pdf, 541 Kb) [Download]

FAQ

Got a comment or have a question? Ask it here ...

^