Loading...

Network Solutions


PoE Injector Single Port

CODE: TL-POE150S, TL-POE150S

AU $26.90
      

Single Port Power over Ethernet (PoE) Injector

  • Up to 15.4W of PoE power (Max 48V)
  • Up to 48V supply (not included, use the power supply that suits your modem/router)
  • Complies with IEEE 802.3af
  • Powers up to 100 metres
  • Throughput 100Mbps data
  • Suitable for the Netcomm NTC-30 when powering via the Ethernet cable.

PoE Receiver Single Port

CODE: TL-POE10R, TL-POE10R

AU $19.90
      

Single Port Power over Ethernet (PoE) Injector

  • Accepts to 15.4W of PoE power (Max Input 48V)
  • Selectable Output Power: 12V@1A, 5V@ 2A via 2.1mm DC socket
  • Complies with IEEE 802.3af
  • Powers up to 100 metres
  • Throughput 100Mbps data
  • Requires PoE Injector such as TL-POE150S
  • Datasheet: TP-Link product download page

Wireless Gigabit WAN Router, 300Mbps 802.11n - Level 1

AU $46.00
      

WAN Wireless N Router Access Point

  • Upgrades your wireless network up to 300Mbps
  • Enlarge wireless network coverage through WDS technology
  • Concurrent Network Address Translation (NAT) sessions up to 20,000
  • Built-in Wake-on-LAN feature to startup/shutdown computers remotely
  • Effortless wireless security with a simple push of the WPS button
  • Built-in robust firewall to protect Internet access against intruders
  • Simple setup with user-friendly interface
  • Supports LevelOne Green power saving technology
  • http://au.level1.com/product_iframe.php?itype=1&id=799&linkid=1059
Indoor and Outdoor Access Point WiFi HotSpots

 

  • 2dBi Detatchable Antennas with SMA fitting 
  • 5dBi Fixed Antennas (+AU $3.90)

Netcomm NP507 Network-over-Powerline Adapter with Gigabit Ethernet

CODE: NP507

AU $199.90
      

NetComm  NP507 600Mbps LAN over Powerline Adapter Kit
The Netcomm NP507 Powerline Kit allows you to extend the Internet network in your house using the existing power lines in your walls.
The Internet signal is transferred between the two pre-paired adapters – all you have to do is connect them to an available power point.
 • Transfer Internet  using the existing network of power lines
 • Data rates of up to 600Mbps
 • Ethernet: IEEE 802.3 10/100/1000 Mbps
 • AC pass-through built into the other adapter with noise filtering
    Plug other electrical devices into the same power point
 • Plug and play - no setup required
 • Twin pack - 2 x Powerline Adapter with AC pass-through socket ( NP507 )

LAN over Power Line


Netcomm NP511 Network-over-Powerline Ethernet

CODE: NP511, NP511

AU $164.90
      

NetComm NP511 500Mbps LAN over Powerline Adapter Kit
The Netcomm NP511 Powerline Kit allows you to extend the Internet network in your house using the existing power lines in your walls.
The Internet signal is transferred between the two pre-paired adapters – all you have to do is connect them to an available power point.

 • Data rates of up to 500Mbps
 • Ethernet: IEEE 802.3 10/100 Mbps
 • AC pass-through built into the base adapter with noise filtering
    Plug other electrical devices into the same power point
 • Plug and play - Pre-paired - no setup required
 • Twin pack - 2 x Powerline Adapter

LAN over Power Line

 

Got a comment or have a question? Ask it here ...

^

Website Security Test

™LMR is a registered trademark of Times Mircowave Systems USA