Loading...
Redirecting ....
Home>Antenna KITS >24dBi 4G TDD 2300 & WiFi 2400MHz Parabolic Grid Antenna
24dBi 4G 2300MHz Parabolic Grid Antenna

View larger image

24dBi 4G TDD 2300 & WiFi 2400MHz Parabolic Grid Antenna

List price: AU $199.00  

Price: AU $149.00

You save: AU $50.00 (25%)
-25%
SOLD OUT !

Coax cable from antenna to wallplate or direct to modem/patch cable

Description

24dbi -  Parabolic Grid Antenna for

 4G 2300 MHz - Mobile Broadband
and
2400 MHz - Wireless Network
NOTE !!  2300 & 2400 MHz only - NOT suitable for any other service

  • 4G Modems that support TDD 2300MHz such as most modern Optus modems.

  • Most suitable for getting the best 2300MHz B40 signal with Optus':
    - Home Wireless Broadband Huawei E5186
    - Vividwireless Unlimited  Huawei B315s

  • Suitable also for Wireless N networks and bridges using the 2.4GHz WiFi band.

  • 2300-2500MHz bandwidth

  • Very directional allowing it to target a particular TDD 2300MHz capable 4G tower.

  • MiMo configured requires 2x antennas.
    Universal pole mounting bracket for H,V or Slant Polarized mounting.

Single 4G LTE grid sntenna kit

24dbi grid antenna for 4G 2300MHz

2x antennas mounted in  MiMo  X-Pol configuration .

This antenna suits 4G services on 2300MHz and 2400MHz WiFi. At this frequency, much signal can be absorbed by rain, fog, and vegetation that is in the direct line from the tower to your location. Thus, the signal path needs to be line-of-sight without obstruction by terrain. This doesn't mean you need to be able to see the cell tower, it just means there must be no hills, mountains or significant buildings, blocking the direct path.  provide.

24dBi 4G 2300/2400 b40 Grid antenna radiation pattern24dBi 4G 2300/2400 b40 Grid antenna radiation pattern

Highly Directional

 

Supplied with FME-Female and SMA-Male (adapter) final connection.
Patch Leads (if required) not included sold separately
Cables & Connections

 The antennas have SMA male connector.

Antenna Pigtail has SMA male connector
The optional additional coax cable is supplied with adapter(s)
LMR400 low-loss coax cable
LL240 and LL400 - SMA female both ends
+
Dual FME SMA Coax Cable Modem Connector Dual FME SMA Coax Cable Modem Connector
LL240 and LL400
SMA female on coax,
SMA male + FME female   adapters included		 LL195
FME female on cable, SMA male adapter included

 Antenna Coax Cable
• Select your required length of
LL195, LL240 or LL400 low-loss coax cable.
• Connects Antenna to Wallplate or direct to your modem/Patch Cable.

Coax specs

  

  SMA-Male and FME-female Final Termination
*When antenna is purchased with an Optional Coax
• Selected Coax Cables are supplied with adapters to provide final terminations of both SMA Male and FME female via included adapter(s).

Others available
 Coax Cable includes a strip of Self Amalgamating Tape to seal the outdoor antenna connection.
self-amalgamating-tape-short-uv-stable-waterproof-1.jpg  
  • Seal antenna connections against Rain, Moisture and UV sunlight.
  • 19 wide x 0.8mm thick.
  • Sufficient tape to cover the outdoor SMA antenna connections in the kit.

Phone/Modem Patch Cable not included - Please purchase separately

Mast shown in pictures is for illustration purposes only.
Mast or pole not included
Best Coax Cable for 4G LTE
lmr400-antenna-cable-super-low-loss-sma-to-sma-made-to-order  

Consider using super-low-loss LMR400 coax for 4G LTE

LMR240 & LMR195 coax are very high quality coax cables. However there are no magical loss-free coax cables and as such are subject to attenuation that increases with increased frequency and longer length as any coax cable.
As the upper 4G bands of 1710MHz - 2700MHz the attenuation per metre will be more than double that of the lower 700, 850 and 900MHz bands.
Thus we always recommend LMR400 super-low-loss coax for runs more than 5m for frequencies over 1GHz in low signal areas.
Specifications

Electrical Data 		2300MHz Band
B40		 2400MHz Band
WiFi 2.4GHz
Frequency(MHz): 2300-2400 2400-2500
Gain: 24dBi 24dBi
VSWR: <1.5:1
 <1.5:1
Polarization: Vertical, Horizontal, ±45° Slant
Horizontal Beamwidth: 9.5°
Vertical Beamwidth: 13°
Nominal Impedance: 50 Ohms 
F/B Ratio: 30 dB 
Lightning Protection: DC Ground 

Mechanical Data
  
Connector: N-female + SMA Male adapter
Dimensions: 990 x 600 x 480 mm 
Weight: 2.4kg 
Pigtail Cable Length: 300mm 
Reflector Material: Aluminium Alloy 
Antenna Material: ABS & Aluminum Alloy 
Mounting Method: Mast 
Mast Diameter: Ø40-Ø70mm  U-Bolt Clamp
Rated Wind Velocity: 210km/h 
Operating temperature: -40~+65°C 
Type: Directional Parabolic Grid 
Attachments

Specification Data (SP-2324-24-N.pdf, 192 Kb) [Download]

FAQ

Got a comment or have a question? Ask it here ...

Products

 

My Account

Track my order(s):

Type the characters you see in the picture below.

 
^