Optus Cel-Fi GO 3G or 4G Repeater

Cel-Fi GO Repeater has been tested, authorized and approved by Optus for use on the Optus Mobile Network. Distribute 3G or 4G mobile signal within your home or office.
Supporting voice and mobile broadband internet.

As the signal available from the mobile network drops, the Cel-Fi repeater increase its boost level by up to 100dB drastically reducing dropped calls and slow data in mobile black spots.

FEATURES

- Designed for fixed building installations.
- Up to 100dB of dynamic system gain.
- Connects to 3G 900MHz (B5) or 4G 700MHz (B28) or 4G 1800MHz (B3)
  *Note - Connects to only one 3G or 4G service at a time.
- Locked to Optus' Mobile Network.
- SMA type outdoor antenna connection for mobile network connection.
- SMA connector for attaching for indoor coverage antenna.
- Carrier approved and legal for use in Australia.
- Band Selection Button.
- Bluetooth WAVE App for iPhone, Android & Computers

Notes regarding 3G and 4G mode selection.

Boost a single band at a time, connecting via 3G 850, 4G 700 or 4G 1800. It will not boost 3G and 4G at the same time. Unless you specifically require 4G, it is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice over 4G (VoLTE or Vo4G) will only work in selected areas and with later model phones.

Coax cables or Antennas available separately.
Can be connected to existing 3G/4G antennas and is a good replacement for illegal repeaters.

Wallplate, Insert, Nut and Washer to suit the SMA female connector on our
LL240 & LL400 coax cables. Select the wallplate you need.

How to order:
Step 1. Select the required wallplate with either SINGLE or DOUBLE  inserts.
Step 2. Coax cable options will then show either 1x coax or 2x coax.
The coax is to  go from the Wallplate to Modem, NOT from the antenna to wallplate.

• Covers 698-960MHz / 1710-2170 / 2300-2700MHz
• Gain:
  8.5dBi @ 698 - 960MHz  - B28 (700), B5 (850) & B8 (900)
  4.5dBi @ 1710 - 2170MHz - B3 (1800), B1 (2100)
  5.5dBi @ 2300 - 2700MHz - B40 (2300), WiFi (2400) & B7 (2600)
• 5m of 9006 foil shielded, low loss coax cable (LMR195/200)
• Terminated with FME female, suits all Phone cradles and Patch Leads
• Length: 2080mm
• Patch Cable not included. Available separately

• Covers 698-960MHz / 1710-2170 / 2300-2700MHz
• Gain:
  6.5dBi @ 698 - 960MHz  - B28 (700), B5 (850) & B8 (900)
  4.5dBi @ 1710 - 2170MHz - B3 (1800), B1 (2100)
  5.5dBi @ 2300 - 2700MHz - B40 (2300), WiFi (2400) & B7 (2600)
• 5m of 9006 foil shielded, low loss coax cable (LMR195/200)
• Terminated with FME female, suits all Phone cradles and Patch Leads
• Length: 970mm
• Patch Cable not included. Available separately